Electro-Fashion Magnet Activated E-Textiles Kit
This pack is a great way to add an unusual switch to your E-Textiles project. When the small magnet is placed next to the magnetic switch, the White LEDs will light.
This pack is a great way to add a different kind of switch to your E-Textiles project.
Add light to your textiles design with this magnetic switch pack. When the small magnet is placed next to the magnetic switch, the LEDs will light.
Everything you need to complete one project.
Great project ideas and tutorials.
Magnetic switch to control the LEDs.
Full instructions for assembly.
1 x Coin Cell Holder.
2 x Sewable LEDs (White).
1 x Magnetic Switch.
1 x CR2032 Coin Cell Battery.
1 x 6m Conductive Thread.
Sewable Coin Cell Holder Length: 34mm.
Sewable Coin Cell Holder Width: 20mm.
Sewable Coin Cell Holder Height: 4.5mm.
Ultra Slim Sewable LED Length: 15mm.
Ultra Slim Sewable LED Width: 6.5mm.
Ultra Slim Sewable LED Height: 2.7mm.
Magnetic Switch Length: 25mm.
Magnetic Switch Width: 6mm.
Magnetic Button Switch Height: 6mm.
CR2032 Battery Height: 3.2mm.
CR2032 Battery Diameter: 20mm.
The coin cell holder in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.
Ultra Slim Sewable LED Lens Type: Water Clear.
Ultra Slim Sewable LED Viewing Angle: 120 degrees.
Ultra Slim Sewable LED Nominal Operating Voltage: 3V.
Ultra Slim Sewable LED (Blue) Luminous Intensity: 300-450mCd (@20mA).
Ultra Slim Sewable LED (White) Luminous Intensity: 1600-1800mCd (@20mA).
CR1220 Battery Capacity: 40mA/h.
CR2032 Battery Voltage: 3V.
CR2032 Battery Capacity: 200mA/h.
Conductive Thread Resistance: Approx 40 Ohms/m.
Conductive Thread Denier: 18.