DIP SWITCH 8 POSITIONS

Product description
Specifications
number of switches: 8
length: 21.32mm
mechanical life: min. 10000 operations per switch
electrical life: min. 5000 operations per switch, 50mA/24Vdc
ratings:
non-switching: 100mA, 50Vdc
switching: 50mA, 24Vdc
circuit: single-pole single-throw
materials and finish:
case: UL94-VO, PBT. PBT is glass-fibre reinforced
cover: UL94-VO, PBT. PBT is glass-fibre reinforced
actuators: UL94-VO, PBT. PBT is glass-fibre reinforced
terminals: phosphor bronze with 3 micro inches of gold plating over nickel
top seal: polyester film
electrical and mechanical specifications:
contact rating (carry):
(a): 50Vdc 100mA in constant situation
(b): 24Vdc 50mA with make-and-break
contact resistance (at current 100mA):
(a): initially max. 30mohm
(b): 100mohm max. after life test
insulation resistance (at voltage 500Vdc): min. 1000Mohm between adjacent terminals
capacitance: 5pF between adjacent terminals
dielectric breakdown voltage: 500Vdc / 1minute
operating temperature range: -40°C to +70°C, no failures
shock: DIP switches withstand a saw-tooth waveform of 20gr 11ms, with no contact opening > 10 microseconds
vibration: MIL-STD-202F-method 201A, frequency : 10-55-10Hz/1 min., direction : X, Y, Z three directions that are perpendicular to each other. No mechanical damage or intermittent change of switch setting during or after testing
markings: special side or top markings are optional
packing:
all DIP switches are shipped in standard IC tubes with all poles in the 'off' position